 |
 |
 |
|
This product is not a normally stocked item - special order , please inquire to get an estimated lead time
1250W PowerVerter plus industrial-strength inverter with 2 outlets
Utilize you vehicle's battery to efficiently power work site power tools, pumps, as well as your laptop computer. Continuously supplies 1250 watts of 120VAC power to (2) AC outlets from any 12VDC battery source. Frequency control locks AC output at 60Hz for operating stability of motor loads and other inductive loads with high current startup requirements.
Requires 12V DC input source capable of delivering 127A for the required
duration (when used at full capacity). For automotive applications,
professional hard wire installation with 200A battery system fusing is
recommended.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18" from the PV1250FC's battery in the positive line.
Features:
Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
1,250 watts continuous output power
Peak output power: OverPower (up to 1 hour) - 1875 watts, Double-Boost (up to 10 seconds) - 2500 watts
2 outlets; DC input terminals for 12V battery connection
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong run time
Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
DC fusing protects inverter against overload
RJ45 port allows connection of APS / PowerVerter Remote Switch (APSRM4)
Automatic overload shutdown
Ignition interlock jack
|
|
|
 |
|
 |
|
