|
|
|
|
This thermally conductive adhesive is a 2-part, heat-cured epoxy adhesive with a 4-hour working time. It is dark grey, smooth, thixotropic, and bonds well to a wide variety of substances.
Use this thermally conductive adhesive to glue heat sinks to LEDs, CPUs, and other heat-generating components. It is viscous, yet flowable enough to be dispensed from a syringe, and the 50ml size may be used with a mixing tip when dispensed with a caulking gun or pressurized system.
This adhesive has been formulated to have a long working time.
Image for illustrative purpose only
Features: 45 mL (0.52 fl oz) - dual cartridge Dispensing gun required - not included : 8DG-50-1-1 Static mixer - not included: 8MT-50, 8MT-50FT Thermal conductivity of 1.2 W/(m·K) 1:1 mix ratio Working time: 4 hours Cure time: 80 minutes at 80 °C (176 °F) Provides strong electrical insulation High compressive strength Strong resistance to humidity, salt water, mild, bases, and aliphatic hydrocarbons
|
|
|
|
|
|
|